Hatteland Industrial 8-Port Slim Type Unmanaged Gigabit PoE Ethernet Switch
Industrial 8-Port Slim Type Unmanaged Gigabit PoE Ethernet Switch
Provide 8x10/100/1000Base-T(X) PoE (P.S.E.) ports, P.S.E. based on IEEE 802.3at standard up to 30 Watts per port, jumbo frame up to 9KBytes, auto-negotiation and auto-MDI/MDI-X, full/half-duplex transmission, store and forward transmission, flow control, Rigid IP-30 housing design, DIN-Rail and wall mounting enabled.
Specifications:
- Physical Ports: 8 x 10/100/1000Base-T(X) Ports in RJ45 With P.S.E.
- Ethernet Standards: IEEE 802.3 for 10Base-T, IEEE 802.3u for 100Base-TX, IEEE 802.3ab for 1000Base-T, IEEE 802.3x for Flow control, IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.). Switching Bandwidth: 16Gbps. MAC Table: 4K MAC addresses. Processing: Store-and-Forward. Jumbo Frame: Up to 9KBytes
- DIP-Switch: DIP-Switch 1: Power-1 failed warning : (ON) enable, (OFF) disable DIP-Switch 2: Power-2 failed warning : (ON) enable, (OFF) disable
- LED Indicators: Power indicator Green: Power LED x 2, Fault indicator Amber: Indicate PWR1 or PWR2 failure, 10/100/1000Base-T(X) RJ45 port indicator and PoE indicator Green for port Link/Act at 1000Mbps / Amber for port Link/Act at 10/100Mbps, Green for PoE power injected.
- Fault Contact: Relay output to carry capacity of 1A at 24VDC
- Power: Redundant Input power: Dual DC inputs. 48 57VDC on 6-pin T. Block PoE output power: 180 Watts Power consumption (Typ.): 6 Watts (PoE output not included) Overload current protection: Present Reverse polarity protection: Present
- Physical: Enclosure: IP-30. Weight: 442 g Dimension (W x D x H): 26.1 (W) x 94.9 (D) x 144.3(H) mm (1.03 x 3.74 x 5.68”)
- Environmental: Storage Temperature: -40 to 85°C (-40 to 185°F) Operating Temperature: -40 to 75°C (-40 to 167°F) Operating Humidity: 5% to 95% Non-condensing
